CMC service menu
The cmc::service> menu includes commands for managing restrictions and SSH access.
See About the CMC command line in SEM for information about using the CMC command line.
Type the service command at the main menu to open the cmc::service> prompt. Commands available from the service menu are listed in the following table in alphabetical order. Y in the "Restart Required" column indicates that a command requires an automatic restart of the SEM Manager service. See Start and stop the SEM appliance and agent for help.
| Command | Description | Restart Required |
|---|---|---|
|
|
Disables the flow Collection Service on the appliance (and in the SolarWinds Explorer). |
N |
|
|
Enables the flow Collection Service on the appliance (and in the SolarWinds Explorer). |
Y |
|
|
Exits the |
N |
|
|
Displays a brief description of each command within the |
N |
|
|
Restarts the SSH service. If the SSH service is running, this command stops and then restarts the service. |
N |
|
|
Restricts access to the SEM console to only certain IP addresses or hostnames. This command prompts you to provide the IP addresses or hostnames that should be allowed access. Once the restriction is in place, only the listed IP addresses or hostnames can connect to the SEM console. Also see |
N |
|
|
Restricts access to reports to only certain IP addresses or hostnames. This command prompts you to provide the IP addresses or hostnames that should be allowed access. Once the restriction is in place, only the listed IP addresses or hostnames can create and view reports. Also see |
N |
|
|
Restrict the SSH service to only certain IP addresses. This command prompts you to provide the IP addresses that should be allowed access. Once the restriction is in place, only the listed IP address and user combinations can connect to the SEM Manager using the SSH service. Also see |
N |
snmp
|
Configures the SNMP Services. See Enable the SNMP Trap Logging Service in SEM to configure SEM to receive SNMP traps. See Set up SEM to communicate with NPM and the SolarWinds Platform Web Console using SNMP to configure SEM and NPM to monitor SEM's CPU, memory, and other critical components. |
N |
|
|
Starts the SSH service. |
N |
|
|
Terminates any connections from the SEM Manager VM to Check Point® Open Platform for Security (OPSEC) hosts. |
N |
|
|
Stops the SSH service. If you issue this command, you can only access the SEM Manager with a keyboard and monitor until you issue a To restrict access to the SSH service (outside of the user name and password requirements), see the |
N |
|
|
Removes access restrictions placed on the SEM console. The only remaining protection is the user name and password combination. This command removes all other restrictions and allows system users with a user name and password to connect to the console. |
N |
|
|
Removes access restrictions placed on the SSH service. The only remaining protection is the user name and password combination |
N |