Documentation forThreat Monitor

TM system requirements

The following specifications are required for a typical SolarWinds data collector deployment under VMware or Hyper-V environments. They are intended as a baseline and should be confirmed with SolarWinds prior to deployment.

Type Minimum Requirements
Hardware
  • VMware
    • 4 cores
    • 8GB RAM
    • 160GB HDD volume
  • Hyper-V
    • 8 cores (Will function with four, but with diminished performance)
    • 8GB RAM
    • 160GB HDD volume
  • 1 Ethernet Controller (NIC) for IP address management
  • 1 Ethernet Controller (NIC) for Intrusion Detection (optional)
Network connectivity and access control lists
  • Static IP address (DHCP for trial users)
    • Connected to an accessible vSwitch instance
  • TCP and UDP port 53 access to internal DNS servers
  • Outbound TCP port 443 (HTTPS) to SolarWinds VPN Gateway (to be determined at deployment time)
  • Local Network Inbound TCP and UDP port 514
    • For local Syslog data sources
  • Local Network bi-directional TCP and UDP port 1514
    • For OSSEC Agent connectivity
  • Inbound TCP port 9654
    • For OSSEC Agent key negotiation
  • Available Physical NIC on the HOST VMware/Hyper-V server
    • To connect to a SPAN/Monitor port within the core-switching environment to facilitate Intrusion Detection capabilities (optional). Specific configuration requirements will be provided prior to implementation.

No inbound connectivity is required from the Internet.

Return to the get started checklist